6th Kumbharwada, Mumbai - 400004, Maharashtra, India.

Stainless Steel Pipe Mechanical Properties

MECHANICAL PROPERTIES
Grade	Tensile	Yield	%Age	Hardness (Max)	-
-	Strength Mpa, (Min)	Strength	Elongation	-	-
-	-	Mpa, (Min)	in 50mm	-	-
-	-	-	gauge length min	BHN	Rb
301	515	205	40	217	95
304	515	205	40	201	92
304L	485	170	40	201	92
310S	515	205	40	217	95
316	515	205	40	217	95
316L	485	170	40	217	95
317	515	205	35	217	95
317L	515	205	40	217	95
321	515	205	40	217	95
347	515	205	40	201	92
409	380	170	20	179	88
409M	430	275	20	187	90
410S	415	205	22	183	89
410	450	205	20	217	89
420	700( max )	-	15	217	95
430	450	205	22	183	89
JSL AUS	515	205	40	217	95
JS- 203	515	205	40	217	95
301M	515	205	40	217	95

Stainless Steel Pipe Chemical Properties

Grade	C (Max)	Mn (Max)	P (Max)	S (Max)	Si (Max)	Cr	Ni	Mo	Nitrogen (Max)	Cu/ Others
201	0.15	5.50/7.50	0.06	0.030	1.0	16.0/18.0	3.5/5.5	-	-	n-25 max
202	0.15	7.50/10.0	0.06	0.030.	1.0	17.0/19.0	4.0/6.0	-	-	n-25 max
JS- 203	0.08	9.2510.25	0.070	0.030	0.75	14.25 - 15.25	2.25 - 2.75	-	-	1.60- 2.0
301	0.15	2.00	0.045	0.030	1.00	16.00 - 18.00	6.00 - 8.00	-	0.10	-
301M	0.10	4.55.5	0.060	0.030	0.75	14.50 - 15.50	6.0 - 7.0	-	-	1.70- 1.90
304	0.08	2.00	0.045	0.030	0.75	18.00 - 20.00	8.00- 10.50	-	0.10	-
304L	0.030	2.00	0.045	0.030	0.75	18.00 - 20.00	8.00- 12.00	-	0.10	-
309s	0.08	2.0	0.045	0.030	1.0	22.0/24.0	12.0/15.0
310	0.25	2.0	0.045	0.030	1.50	24.0/26.0	19.0/22.0
310S	0.08	2.00	0.045	0.030	1.50	24.00- 26.00	19.00 - 22.00	-	-	-
316	0.08	2.00	0.045	0.030	0.75	16.00 - 18.00	10.00 - 14.00	2.00 - 3.00	0.10	-
316L	0.030	2.00	0.045	0.030	0.75	16.00 - 18.00	10.00 - 14.00	2.00 - 3.00	0.10	-
317	0.08	2.00	0.045	0.030	0.75	18.00 - 20.00	11.00 - 14.00	3.00 - 4.00	0.10	-
317L	0.030	2.00	0.045	0.030	0.75	18.00 - 20.00	11.00 - 15.00	3.00 - 4.00	0.10	-
321	0.08	2.00	0.045	0.030	0.75	17.00 - 19.00	9.00 - 12.00	-	0.10	Ti5 ( C + N ) Min or 0.70 max
347	0.08	2.00	0.045	0.030	0.75	17.00 - 19.00	9.00 - 13.00	-	-	Cb= 10x ( C Min ) or 1.00 Max
409	0.08	1.00	0.040	0.010	1.00	10.50 - 11.75	0.50	-	-	Ti= 6x (C+ N ) Min or 0.70 Max
409M	0.03	0.81.2	0.030	0.030	0.40.75	11.00- 12.00	1.5 max.	-	-	Ti= 6x (C) Min or 0.70 Max
410S	0.08	1.00	0.040	0.030	1.00	11.50- 13.50	0.60	-	-	-
410	0.15	1.00	0.040	0.030	1.00	11.50- 13.50	0.75	-	-	-
420	0.35	0.50	0.035	0.015	0.50	12.00 - 13.00	0.20.3	-	-	-
440A	0.60/0.70	1.0	0.040	0.030	1.0	16.0/18.0	-	-	-	-
440B	0.75,0.95	1.0	0.040	0.030	1.0	16.0/18.0	-	-	-	-
440C	0.95, 1.2	1.0	0.040	0.030	1.0	16.0/18.0	-	-	-	-
430	0.12	1.00	0.040	0.030	1.00	16.00 - 18.00	0.75	-	-	-
JSL AUS	0.08	7.08.0	0.070	0.030	0.75	15.50 - 16.50	4.25 - 4.75	-	-	0.9 - 1.10
904L	0.02	2.00	0.030	0.045	1.00	19.0-23.0	23.0-28.0	-	-	23.0-28.0
2205	0.03	2.00	0.030	0.020	1.00	21.0-23.0	4.5-6.5			4.5-6.5
2207	0.030	1.20	0.035	0.020	0.30	24.0-26.0	6.0-8.0	-	-	6.0-8.0
* Thickness of 1.27mm & below will have elongation of 20% min.

STAINLESS STEEL PIPE DIMENSION AS PER ASTM & WEIGHT-KG. PER MTR. (ANSI B36.19)

Nominal Bore		Outside Diameter	Sch-5S		Sch-10S		Sch-40S		Sch-80S		Sch-160S		Sch-XXS
mm	INCH	mm	Wt	Weight	Wt	Weight	Wt	Weight	Wt	Weight	Wt	Weight	Wt	Weight
mm	INCH		mm	(Kg/mt)	mm	(Kg/mt)	mm	(Kg/mt)	mm	(Kg/mt)	mm	(Kg/mt)	mm	(Kg/mt)
3	43313	10.3	1.24	0.276	1.24	0.28	1.73	0.37	2.41	0.47	-	-	-	-
6	43191	13.7	1.24	0.39	1.65	0.49	2.24	0.631	3.02	0.8	-	-	-	-
10	43315	17.1	1.24	0.49	1.65	0.63	2.31	0.845	3.2	1.1	-	-	-	-
15	43132	21.3	1.65	0.8	2.11	1	2.77	1.27	3.75	1.62	4.75	1.94	7.47	2.55
20	43193	26.7	1.65	1.03	2.11	1.28	2.87	1.68	3.91	2.2	5.54	2.89	7.82	3.63
25	1	33.4	1.65	1.3	2.77	2.09	3.38	2.5	4.55	3.24	6.35	4.24	9.09	5.45
32	1.25	42.2	1.65	1.65	2.77	2.7	3.56	3.38	4.85	4.47	6.35	5.61	9.7	7.77
40	1.5	48.3	1.65	1.91	2.77	3.11	3.68	4.05	5.08	5.41	7.14	7.25	10.16	9.54
50	2	60.3	1.65	2.4	2.77	3.93	3.91	5.44	5.54	7.48	8.74	11.1	11.07	13.44
65	2.5	73	2.11	3.69	3.05	5.26	5.16	8.63	7.01	11.4	9.53	14.9	14.2	20.39
80	3	88.9	2.11	4.51	3.05	6.45	5.49	11.3	7.62	15.2	11.1	21.3	15.24	27.65
100	4	114.3	2.11	5.84	3.05	8.36	6.02	16.07	8.56	22.3	13.49	33.54	17.12	41.03
125	5	141.3	2.77	9.47	3.4	11.57	6.55	21.8	9.53	31.97	15.88	49.11	19.05	57.43
150	6	168.3	2.77	11.32	3.4	13.84	7.11	28.3	10.97	42.7	18.2	67.56	21.95	79.22
200	8	219.1	2.77	14.79	3.76	19.96	8.18	42.6	12.7	64.6	23	111.2	22.23	107.8
250	10	273.1	3.4	22.63	4.19	27.78	9.27	60.5	12.7	96	28.6	172.4	25.4	155.15
300	12	323.9	3.96	31.25	4.57	36	9.52	73.88	12.7	132	33.32	238.76	25.4	186.97
350	14	355.6	3.96	34.36	4.78	41.3	11.13	94.59	19.05	158.08	35.71	281.7	-	-
400	16	406.4	4.19	41.56	4.78	47.29	12.7	123.3	21.41	203.33	40.46	365.11	-	-
450	18	457.2	4.19	46.8	4.78	53.42	14.27	155.8	23.8	254.36	45.71	466.4	-	-
500	20	508	4.78	59.25	5.54	68.71	15.09	183.42	26.19	311.2	49.99	564.68	-	-
600	24	609.6	5.54	82.47	6.35	94.45	17.48	255.41	30.96	442.08	59.54	808.22	-	-

WEIGHT & THICKNESS OF S.S GUAGE PIPES

DIMENSION		10 SWG(3.2 MM)	12 SWG(2.6 MM)	14 SWG(2.1 MM)	16 SWG(1.65 MM)	18 SWG(1.2 MM)	19 SWG(1.0 MM)
Size	OD	Weight/MTR	Weight/MTR	Weight/MTR	Weight/MTR	Weight/MTR	Weight/MTR
1/2"	12.7	0.754	0.651	0.552	0.452	0.342	0.290
5/8"	15.875	1.006	0.856	0.718	0.582	0.437	0.369
3/4"	19.05	1.258	1.061	0.883	0.712	0.531	0.448
1"	25.4	1.762	1.470	1.214	0.972	0.720	0.605
1 1/4"	31.75	2.266	1.880	1.544	1.232	0.909	0.763
1 1/2"	38.1	2.770	2.289	1.875	1.492	1.098	0.920
2"	50.8	3.778	3.108	2.537	2.012	1.476	1.235
2 1/2"	63.5	4.786	3.928	3.198	2.531	1.854	1.550
3"	76.2	5.794	4.747	3.860	3.051	2.232	1.865
3 1/2"	88.9	6.802	5.566	4.521	3.571	2.610	2.180
4"	101.6	7.810	6.385	5.183	4.091	2.988	2.495

ASTM SPECIFICATION & TOLERANCE FOR TUBING & PIPING

Specification	Allowable Outside Diameter Variation in mm			Allowable Wall Thickness Variation		Exact Length Tolerance in mm		Testing
	Nominal Diameter	Over	Under	%Over	%Under	Over	Under	Flattening Test Tension Test Flare Test Hardness Test100% Hydrostatic testRefer to ASTM A-450
ASTM-A213	Under 25.4	.1016	.1016	+20	-0	3.175	0
Seamless Boiler	25.4-38.1 incl	.1524	.1524	+22	-0	3.175	0
Superheater and	38.1-50.8 excl	.2032	.2032	+22	-0	3.176	0
Heat Exchanger	50.8-63.5 excl	.254	.254	+22	-0	4.46	0
Tubes	63.5-76.2 excl	.3048	.3048	+22	-0	4.76	0
	76.2-101.6 incl	.381	.381	+22	-0	4.76	0
	Under 25.4	.1016	.1016	+10	-10	3.175	0	Tension Test Flattening Test Flange Test Reverse Bend Test Hardness Test100% Hydrostastic TestRefer to ASTM A-450
ASTM-A249	25.4-38.1 incl	.1524	.1524	+10	-10	3.175	0
Welded Boiler	38.1-50.8 Excl	.2032	.2032	+10	-10	3.175	0
Superheater, Heat	50.0-63.5 excl	.254	.254	+10	-10	4.762	0
Exchanger And	63.5-76.2 excl	.3848	.3048	+10	-10	4.762	0
Condenser Tubes	76.2-101.6 incl	.381	.381	+10	-10	4.762	0
				Minimum Wall tubes
				+ 18% 0 available
				On request
	Untp 12.7	.13	.13	+15	-15	3.2	0	Flare Test (Seamless Only)
ASTM-A269	12.7-38.1 excl	.13	.13	+10	-10	3.2	0	Flange Test (Welded Only)
Seamless & Welded	38.1-88.9 excl	.25	.25	+10	-10	4.8	0	Hardness Test
Tubing for General	88.9-139.7 excl	.38	.38	+10	-10	4.8	0	Reverse Flattening Test
Service	139.7-203.2 excl	.76	.76	+10	-10	4.8	0	(Welded only)
								100% Hydrostatic Test
								Refer to ASTM-A269
	25.4	.05	.20	+10.0	-10.0	3.2	0	Reverse flattening Test 100% Hydrostastic Test External’ polish on all tubes Refer to ASTM A-270
	38.1	.05	.20	+10.0	-10.0	3.2	0
ASTM-A270	50.8	.05	.28	+10.0	-10.0	3.2	0
Seamless & Welded	60.5	.05	.28	+10.0	-10.0	3.2	0
Sanitary Tubing	76.2	.08	.30	+10.0	-10.0	3.2	0
	101.6	.08	.38	+10.0	-10.0	4.8	0
	3.175-38.1 incl	.4	.79	Minimum Wall		6.4	0	Tension Test Flattening Test100% Hydrostatic TestRefer to ASTM A-530
	38.1-1016 incl	.79	.79	12.5% under		6.4	0
ASTM-A312	101.6-203.2 incl	1.59	.79	nominal wall		6.4	0
Seemless & Welded pipe				Specified		(Normally Random
						Lengths ordered)
ASTM A-358Welded pipe	219.08-750mm	+0.5%		-0.3		6.0		Refer to ASTM A-530

Carbon Steel Chemical Properties

Speci -cation	Grade	Chemical Composition [%]															Mechanical Properties
		C		Mn		P	S	Si		Cr		Mo		Cu	Ni	V	Yield Strength		Tensile Strength			% Elongation (G.L. 50 mm WT 8 mm) e (min.)
		C		Mn		P	S	Si		Cr		Mo		Cu	Ni	V	Min.		Min.
		Min	Max.	Min	Max.	Max.	Max.	Min.	Max	Min.	Max	Min.	Max	Max	Max	Max	PSI	MPa	PSI	MPa
HYDROCARBON PROCESS INDUSTRY/STRUCTURAL/PRESSURE VESSEL TUBES
ASTM	A	-	0.25	-	0.95	0.05	0.045	-	-	-	0.4	-	0.15	0.40 for S	0.4	0.08	30,000	205	48,000	330	e=625000 A02/U09
A-53	B	-	0.3	-	1.2	0.05	0.045	-	-	-	0.4	-	0.15	0.40 for S	0.4	0.08	35,000	240	60,000	415	e=625000 A02/U09
ASTM	A	-	0.25	0.27	0.93	0.035	0.035	0.1	-	-	0.4	-	0.15	0.4	0.4	0.08	30,000	205	48,000	330	35L / 25T
A-106	B	-	0.3	0.29	1.06	0.035	0.035	0.1	-	-	0.4	-	0.15	0.4	-	0.08	35,000	240	60,000	415	30L / 16.5T
-	c	-	0.35	0.29	1.06	0.035	0.035	0.1	-	-	0.4	-	0.15	0.4	-	0.08	40,000	275	70,000	485	30L / 16.5T
ASTM	1	-	0.3	0.4	1.06	0.025	0.025	-	-	-	-	-	-	-	-	-	30,000	205	55,000	380	35
A333 & A 334	6	-	0.3	0.29	1.06	0.025	0.025	0.1	-	-	-	-	-	-	-	-	35,000	240	60,000	415	30
SEAMLESS COLD DRAWN PRECISION STEEL TUBES FOR MECHANICAL APPLICATIONS/HYDRAULIC/PNEUMATIC POWER SYSTEMS
EN 10305-1/	E 235	-	0.17	-	1.2	0.025	0.025	-	0.35	-	-	-	-	-	-	0.02	-	235	-	340	25
EN10305-4	E 355	-	0.22	-	1.6	0.025	0.025	-	0.55	-	-	-	-	-	-	0.02	-	355	-	490	22
EN 10216-1	P195 TR1	-	0.13	-	0.7	0.025	0.02	-	0.35	-	0.3	-	0.08	0.3	0.3	-	-	195	-	320	27
EN 10216-1	P235 TR1	-	0.16	-	1.2	0.025	0.02	-	0.35	-	0.3	-	0.08	0.3	0.3	-	-	235	-	360	25
EN 10216-2	P235 GH	-	0.16	-	1.2	0.025	0.02	-	0.35	-	0.3	-	0.08	0.3	0.3	0.02	-	-	-	-	-
DIN 2391	St - 45	-	0.17	0.4	-	0.025	0.025	-	0.35	-	-	-	-	-	-	-	NBK : 215 / GBK : -		NBK : 340 / GBK : 315		NBK : 470
	St - 45	-	0.21	0.4	-	0.025	0.025	-	0.35	-	-	-	-	-	-	-	NBK : 255 / GBK : -		NBK : 440 / GBK : 390		NBK : 570
	St - 52	-	0.22	-	1.6	0.025	0.025	-	0.55	-	-	-	-	-	-	-	NBK : 355 / GBK : -		NBK : 490 / GBK : 490		NBK : 630
ASTM	SAE 1010	0.08	0.13 0.20	0.3	0.6	0.04	0.05	-	-	-	-	-	-	-	-	-	As per Customer requirements
A-519	SAE 1018	0.15	0.28	0.6	0.9	0.04	0.05	-	-	-	-	-	-	-	-	-
-	SAE 1026	0.22	0.38	0.6	0.9	0.04	0.05	-	-	-	-	-	-	-	-	-
-	SAE 1035	0.32	0.44	0.6	0.9	0.04	0.05	-	-	-	-	-	-	-	-	-
-	SAE 1040	0.37	0.21	0.6	0.9	0.04	0.05	-	-	-	-	-	-	-	-	-
-	SAE 1518	0.15	0.44	1.1	1.4	0.04	0.05	-	-	-	-	-	-	-	-	-
-	SAE 1541	0.36	0.33	1.35	1.65	0.04	0.05	-	-	-	-	-	-	-	-	-
-	SAE 4130	0.28	-	0.4	0.6	0.04	0.04	0.15	0.35	0.8	1.1	0.15	0.25	-	-	-
BOILER/HEAT EXCHANGER/SUPERHEATER & CONDENSER TUBES
ASTM A179	-	0.06	0.18	0.27	0.63	0.035	0.035	-	-	-	-	-	-	-	-	-	26,000	180	47,000	325	35
ASTM A192	-	0.06	0.18	0.27	0.63	0.035	0.035	-	0.25	-	-	-	-	-	-	-	26,000	180	47,000	325	35
ASTM	A-1	-	0.27	-	0.93	0.035	0.035	0.1	-	-	-	-	-	-	-	-	37,000	255	60,000	415	30
A 210	C	-	0.35	0.29	1.06	0.035	0.035	0.1	-	-	-	-	-	-	-	-	40,000	275	70,000	485	30
ASTM	T-11	0.05	0.15	0.3	0.6	0.025	0.025	0.5	1	1	1.5	0.44	0.65	-	-	-	30,000	205	60,000	415	30
A 213	T-12	0.05	0.15	0.3	0.61	0.025	0.025	-	0.5	0.8	1.25	0.44	0.65	-	-	-	32,000	220	60,000	415	30
-	T-22	0.05	0.15	0.3	0.6	0.025	0.025	-	0.5	1.9	2.6	0.87	1.13	-	-	-	30,000	205	60,000	415	30
ASTM	P-11	0.05	0.15	0.3	0.6	0.025	0.025	0.5	1	1	1.5	0.44	0.65	-	-	-	30,000	205	60,000	415	30
A335	P-12	0.05	0.15	0.3	0.61	0.025	0.025	-	0.5	0.8	1.25	0.44	0.65	-	-	-	32,000	220	60,000	415	30
-	P-22	0.05	0.15	0.3	0.6	0.025	0.025	-	0.5	1.9	2.6	0.87	1.13	-	-	-	30,000	205	60,000	415	30
BS 3059 Pt I	320	-	0.16	0.3	0.7	0.04	0.04	0.1	0.35	-	-	-	-	-	-	-	28,000	195	46,000	320	69,500
BS 3059 Pt II	622-490	0.08	0.15	0.4	0.7	0.03	0.03	-	0.5	2	2.5	0.9	1.2	-	-	-	40,000	275	71,000	490	93,000
DIN 1629	St- 37.0	-	0.17	-	-	0.04	0.04	-	-	-	-	-	-	-	-	-	WT 16mm = 235 / WT>16mm = 225		350		-
DIN 1629	St - 52	-	0.22	-	-	0.04	0.035	-	-	-	-	-	-	-	-	-	WT 16mm = 355 / WT>16mm = 345		-		Long 21 / Trans 19
DIN 17175	St - 35.8	-	0.17	0.4	0.8	0.04	0.04	0.1	0.35	-	-	-	-	-	-	-	WT 16mm = 235 / WT>16mm = 225		360		480
DIN 17175	St - 45.8	-	0.21	0.4	1.2	0.04	0.04	0.1	0.35	-	-	-	-	-	-	-	WT 16mm = 255 / WT>16mm = 245		410		530
RAILWAYS
IS:1239 Pt I	-	-	-	-	-	0.05	0.05	-	-	-	-	-	-	-	-	-	-	-	46,500	320	-
IS:1161	YST-210	-	0.12	-	0.6	0.04	0.04	-	-	-	-	-	-	-	-	-	30,500	210	48,000	330	-
	YST-240	-	0.16	-	1.2	0.04	0.04	-	-	-	-	-	-	-	-	-	35,000	240	59,500	410	-
	YST-310	-	0.25	-	1.3	0.04	0.04	-	-	-	-	-	-	-	-	-	45,000	310	64,500	445	-
-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Nickel Alloy Chemical Properties

U.S.A. / GROSSBRITAINNIE- U.S.A. / GRANDE-BRETAGNE-- U.S.A. / GREAT BRITAIN
Handelsbezeichung	C%	Co%	Cr%	Mo%	Ni%	V%	W%	Ai%	Cu%	Nb/Cb Ta%	Ti%	Fe%	Sonstige Autres-Other%
Designation Comercial	-	-	-	-	-	-	-	-	-	-	-	-	-
Comercial designation	-	-	-	-	-	-	-	-	-	-	-	-	-
Monel 400	0.12	-	-	-	65	-	-	-	32	-	-	1.5	Mn 1.0
Monel 401	0.1	-	-	-	43	-	-	-	53	-	-	0.75	Si 0.25; Mn 2.25
Monel 404	0.15	-	-	-	52.0-57.0	-	-	0.05	rest/bal	-	-	0.5	Mn 0.10; Si 0.10;S o.024
Monel 502	0.1	-	-	-	63.0-17.0	-	-	2.5-3.5	rest/bal	-	0.5	2	Mn 1.5;Si 0.5; S 0.010
Monel K 500	0.13	-	-	-	64	-	-	2.8	30	-	0.6	1	Mn 0.8
Monel R 405	0.15	-	-	-	66	-	-	-	31	-	-	1.2	Mn 1.0; S 0.04
Hastelloy B	0.1	1.25	0.6	28	rest/bal	0.3	-	-	-	-	-	5.5	Mn 0.80; Si 0.70
Hastelloy B2	0.02	1	1	26.0-30.0	rest/bal	-	-	-	-	-	-	2	Mn 1.0: Si 0.10
Hastelloy C	0.07	1.25	16	17	rest/bal	0.3	40	-	-	-	-	5.75	Mn 1.0 :Si 0 0.70
Hastelloy C4	0.015	2	14.0-18.0	14.0-17.0	rest/bal	-	-	-	-	-	0..70	3	Mn 1.0 ; Si 0.08
Hastelloy- C 276	0.02	2.5	14.0-16.5	15.0-17.0	rest/bal	0.35	3.0-4.5	-	-	-	-	4.0-7.0	Mn 1.0;Si 0.05
Hastelloy F	0.02	1.25	22	6.5	rest/bal	-	0.5	-	-	Nb2.10	-	21	Mn 1.50;Si 0.50
Hastelloy G	0.05	2.5	21.0-23.5	5.5-7.5	rest/bal	-	1	-	1.5-2.5	Nb1.75-2.5	-	18.0-21.0	Mn 1.0-2.0;p0.04;Si 1.0;80.03
Hastelloy G-2	0.03	-	23.0-26.0	5.0-7.0	47.0-52.0	-	-	-	0.70-1.20	-	0.70-1.50	rest/bal	Mn 1.0;Si 1.0
Hastelloy N	0.06	0.25	7	16.5	rest/bal	-	0.2	-	0.1	-	-	3	Mn 0.40;Si 0.25;B0.01
Hastelloy S	0.02	2	15.5	14.5	rest/bal	0.6	1	0.2	-	-	-	3	Mn 0.50;Si 0.40;B0.0009;LA 0.02
Hastelloy W	0.06	1.25	5	24.5	rest/bal	-	-	-	-	-	-	5.5	Mn 0.050 ; Si 0.50
Hastelloy X	0.1	1.5	22	9	rest/bal	-	0.6	-	-	-	18.5	-	Mn 0.6; Si 0.60
Incoloy 800	0.04	-	21	-	32	-	-	0.3	-	-	0.4	45	-
Incoloy 800 H	0.08	-	21	-	32	-	-	0.3	-	-	0.4	45	-
Incoloy 801	0.05	-	20.5	-	32	-	-	-	-	-	1.1	45	-
Incoloy 802	0.35	-	21	-	32	-	-	0.6	-	-	0.7	45	-
Incoloy 804	0.05	-	29.5	-	41	-	-	0.3	-	-	0.6	25.4	-
Incoloy 805	0.12	-	7.5	0.5	36	-	-	-	0.1	-	-	rest/bal	Mn 0.60;Si 0.50
Incoloy 810	0.25	-	21	-	32	-	-	-	0.5	-	-	rest/bal	Mn 0.90; Si 0.80
Incoloy 825	0.04	-	21	3	42	-	-	-	2	-	1	30	-
Incoloy 825 Cp	0.04	-	21.5	3	42	-	-	-	2.2	Nb0.9	-	30	-
Incoloy 840	0.08	-	20	-	20	-	-	-	-	-	-	rest/bal	Mn 1.0;Si 1.0
Incoloy 901	0.05	-	12.5	6	rest/bal	-	-	0.15	-	-	2.7	34	Mn 0.24;Si 0.12;B0.015
Incoloy 901 Mod	0.05	-	12.5	5.8	rest/bal	-	-	-	-	-	2.9	34	Mn 0.09;Si 0.08;B0.015
Incoloy 903	0.02	15	-	-	38	-	-	0.7	-	Nb 3.0	1.4	41	-
Incoloy 904	0.02	14	-	-	33	-	-	-	-	-	1.7	50	-
Incoloy DS	0.06	-	18	-	37	-	-	-	-	-	-	42	Mn 1.0; Si 2.3
Incoloy Ma- 956	-	-	20	-	-	-	-	4.5	-	-	0.5	74.4	Y2.03 0.5
Incoloy 600	0.05	-	15.5	-	75	-	-	-	-	-	-	8	-
Incoloy 601	0.05	-	23	-	60	-	-	1.4	-	-	-	14	-
Incoloy 604	0.04	-	15.8	-	rest/bal	-	-	-	0.1	Nb 2.0	-	7.2	Mn 0.20; Si 0.20
Incoloy 610	0.2	-	15.5	-	rest/bal	-	-	-	0.5	Nb 1.0	-	9	Mn 0.90;Si 2.0
Incoloy 617	0.07	12.5	22.5	9	54	-	-	1	-	-	-	-	-
Incoloy 625	0.05	-	21.5	9	61	-	-	0.4	-	Nb 3.65	0.4	2.5	Mn 0.50; Si 0.50
Incoloy 671	0.05	-	48	-	51	-	-	-	-	-	0.35	-	-
Incoloy 700	0.12	28.5	15	3.75	46	-	-	3	0.05	-	2.2	0.7	Mn 0.10; Si 0.30
Incoloy 702	0.04	-	15.6	-	rest/bal	-	-	3.4	0.1	-	0.7	0.35	Mn 0.05: Si 0.20
Incoloy 705	0.3	-	15.5	-	rest/bal	-	-	-	0.5	-	-	8	Mn 0.90 ; Si 5.5

Stainless Steel Pipe Mechanical Properties

Stainless Steel Pipe Chemical Properties

STAINLESS STEEL PIPE DIMENSION AS PER ASTM & WEIGHT-KG. PER MTR. (ANSI B36.19)

WEIGHT & THICKNESS OF S.S GUAGE PIPES

ASTM SPECIFICATION & TOLERANCE FOR TUBING & PIPING

Carbon Steel Chemical Properties

Nickel Alloy Chemical Properties

More Products

Address:1st Floor, Plot-166/170, Durgadevi Udyan, 6th Kumbharwada, Trimbak Parshuram Street, Mumbai - 400004, Maharashtra, India

Phone: +91 70539 99995

Phone: +91 22 6638 1330

capitalalloys1@gmail.com

info@capitalalloys.net

quality@capitalalloys.net

Technical Information

Stainless Steel Pipe Mechanical Properties

Stainless Steel Pipe Chemical Properties

STAINLESS STEEL PIPE DIMENSION AS PER ASTM & WEIGHT-KG. PER MTR. (ANSI B36.19)

WEIGHT & THICKNESS OF S.S GUAGE PIPES

ASTM SPECIFICATION & TOLERANCE FOR TUBING & PIPING

Carbon Steel Chemical Properties

Nickel Alloy Chemical Properties

More Products